The touchscreen can support Pi 3 Now ！only just edit config.txt for setting resolution or use we provide config as below URL,make sure the the power supply is 5V 2.5A for Pi or extal power for touchscreen.

A good solution for those seeking for a bigger resolution display. supports muti Embedded single board computer ，it can work as a computer monitor just like any other general HDMI screen too (win7、win8、win 10 is available) we Provide the customized raspberry and Banana pro/pi raspbian and Ubuntu image，Beaglebone black Angstrom and Android 4.2.2，we design a Customized shell make your pi / Bpi / BB to be a really Integrated Computer.

 It very easy to setup, We have packaged the customized image with the driver for you, which based on the official Operating System, so you don,t need to download driver with the step and step instructions. and we provide the touch driver for raspbian，which can install your raspbian. We provide a detail user guide file at our website . After the image installation, power on the board, contect the cables for LCD,it may take 20 seconds for loading the driver, and then the LCD will work.

If you choose to use a distribution(Raspbian/Ubuntu/win10 Iot) from the Raspberry Pi Website in place of our pre-  compiled distributions, you only should locate the “config.txt” file we provided, then replace the original “config.txt” file and save. It can work properly.

The best simple way is add the follow line to the end of the config.txt：

hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 800 480 60 6 0 0 0
max_usb_current=1

saved and reboot.

Version1.4 Features： 

●7.0-inch TFT Resistive touch screen display, 800x480 Resolution 
●HDMI input 
●Powered and touch by USB

●Powered by USB，5V@1A

●Supports Raspberry Pi(Raspbian/Ubuntu/Win 10 Iot), BB Black(Angstrom), Banana Pi / Banana Pro(Raspbian/Ubuntu ),all img we will provided

●Not only for mini-PCs, it can work as a computer monitor just like any other general HDMI screen (win7、win8、win 10 is available)
●Lcd driver IC: GT188 
●Refresh rate：60HZ 
● Lcd Size ：188mm*107mm

●Powered by USB，5V@1A

●Supports Raspberry Pi, BB Black, Banana Pi / Banana Pro

●Not only for mini-PCs, it can work as a computer monitor just like any other general HDMI screen (touch function is unavailable in this case) 
●Lcd driver IC: GT188 
●Refresh rate：60HZ 
● Lcd Size ：188mm*107mm

Files:

the version1.4(support win10 lot 20160113)

7.0LCD user guide: download

all image: download

Raspbian and Ubuntu config file : download

win 10 Iot config file : download

the version1.3(the GPIO can be used 20150730) 

Rpi 2 wheezy-raspbian: download

Rpi 2 ubuntu: download

Rpi B+ wheezy-raspbian: download

the version1.2(20150430)

Installation instructions for the Customized shell: download

7.0LCD user guide: download

Image: download

the version1.1(20150330)

Installation instructions for the Customized shell: download

7.0LCD user guide: download

Image: download

the version1.0(20150120)

7.0LCD user guide: download

Rpi2 image: download

Rpi B/B+ raspbian_XBMC image: download

Rpi B/B+ wheezy-raspbian: download

Rpi B/B+ raspbian drivers: download

Package Content： 

7.0 Touch Screen LCD Display(Version1.4) x1

UBS cable x1
Customized shell for lcd（need to assemble by youself）x1

DVD x1

Note ： case for main board is not included

Update driver（Oct27th）： Thanks to He.sicong ArhiChief and ,They both provide a new open source driver for the touchscreen,you can download here ：

https://github.com/ArhiChief/eleduino_ts   or https://github.com/derekhe/waveshare-7inch-touchscreen